Publicité
Les langues disponibles
Les langues disponibles
g)
To ensure the designed operational integrity of the device, do not remove
factory installed covers or loosen screws.
h)
It is forbidden to move, shift or rotate the device during operation.
i)
Never leave the powered device unattended.
j)
The device should be cleaned regularly to prevent permanent accumulation of
dirt.
k)
The device is not a toy. Cleaning and maintenance may not be performed by
children without the supervision of an adult.
l)
It is prohibited to modify the design of the device in order to change its
parameters or structure.
m) Keep the device away from sources of fire and heat.
n)
When operating the device, do not look into the light emitted by the device
without wearing proper safety glasses.
o)
Install the device in a place protected from moisture, e.g. condensation water.
p)
Check the wiring before starting the device.
q)
Disconnect power before starting installation.
r)
Do not use the device in places such as kitchens and food processing plants,
where there are large amounts of soot and smoke, or in chemical plants and
chemical warehouses, which may cause corrosion.
s)
Never install or use the device in areas with high temperature fluctuations
which could lead to breakage and damage to the device.
t)
Be sure to install and operate the device in places where the ambient
temperature is between 20-45°C.
3. Principles of use
The product is intended for indoor lighting.
The user is responsible for any damage resulting from use other than intended.
3.1.
Description of the device
NOTE! Although the device has been designed to be safe, with
adequate safeguards, and despite the use of additional user
safety features, there is still a small risk of accident or injury when
handling the device. We recommend that you exercise caution
and common sense when using it.
Publicité
