OHAUS Navigator Guide D'utilisation page 2

TM
Navigator
2. UNPACKING
Carefully remove your balance and each of its components from the package. Store the
packaging material to ensure safe storage and future transport.
Included Components:
 Balance
 User Guide
3. PREPARATION FOR USE
Step-1 Selecting the location
Place on a firm, steady surface with
sufficient space. Avoid excessive air
current, vibrations, heat sources, or rapid
temperature changes
Step-2 Transportation Lock
The Transportation Lock is located under
the balance. Rotate the pointer to the
unlocked position.
Note: No shipping lock on Approved
models
Step-3 Connect Power
Connect the AC adapter to the balance
input jack.
Battery installation
Install the four "C" batteries (not included)
with polarity as shown in the battery
compartment.
Step-4 Leveling the Equipment
To level the instrument, adjust the
feet/leveling wheel so the bubble is
centered in the circle of the level indicator.
Be sure the equipment is level each time
its location is changed.
Note:
After power on, it is recommended to let the balance warm up for at least 5 minutes
before using it.
TM
Navigator
 Pan
 Warranty Card
2
 AC Adapter & Plug
Locked
position
Input Jack
Battery
Cover
Ohaus Corporation
User Guide
Unlocked
position
www.ohaus.com