Bosch AdvancedGrassCut 36 Notice Originale page 17

Lawn trimmer/Edge cutter
– without battery
– with battery
Serial number
Recommended ambient temperature during
charging
Permitted ambient temperature during opera-
B)
tion and storage
Battery type
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
Charger
Charging current
Charging period (battery discharged)
– Battery with 2.0 Ah
– Battery with 4.0 Ah
– Battery with 6.0 Ah
Weight according to EPTA‑Procedure
01:2014
Protection class
Noise/Vibration Information
Noise emission values determined according to EN 50636-2-91.
Typically the A-weighted noise levels of the product are:
– Sound pressure level
– Sound power level
– Uncertainty K
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 50636-2-91
– Vibration emission value a
h
– Uncertainty K
Assembly
Caution: Switch the garden tool off and pull the mains
u
plug before performing any maintenance.
Mounting the shaft (see figure B)
Connect the two trimmer parts flush with each other and se-
cure them by screwing on the connector(3). Ensure both
trimmer parts are fitted properly mounted and locked.
Mounting and adjusting the handle (see Fig. C)
Mount the handle using the screw (5) and the nut (6).
The handle (4) can be set to different positions. To change
the adjustment, loosen the nut (6) a little and move the
handle to the desired position. Retighten the nut (6) again.
Bosch Power Tools
kg
kg
°C
°C
A
min
min
min
kg
dB(A)
dB(A)
dB
2
m/s
2
m/s
Mounting the protection guard (see figure D)
Position the protection guard (7) on the trimmer head and
fasten it with the provided screw (9).
Switching on
Caution: Switch garden tool off and remove battery
u
from machine before adjusting or cleaning.
The cutting line continues to rotate for a few seconds
u
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching on again.
Do not briefly switch off and on again several times in
u
a row.
Only use Bosch approved cutting elements. Cutting
u
performance will vary with different cutting elements.
English | 17
AdvancedGrassCut 36
2.9
4.1
see type plate on mower
+10... +35
-20... +50
GBA 36V...
2.0 Ah, 4.0 Ah, 6.0 Ah
AL 36V-20
2.0
65
125
185
0.55
/ II
3 600 H78 N..
74
91
= 3.0
= 2.0
= 1.0
F 016 L94 427 | (17.05.2022)