Bresser ClimaTemp Mode D'emploi page 14

POWER SUPPLY
1. Open the battery compartment door.
2. First use: remove the tranparent plastic tab. Battery change: Use only a CR2032 (3.0V) type battery
and insert it according to the polarities (+/-) shown.
3. Reinsert the battery compartment door.
OPERATION
Temperature and humidity
1. Once the battery is installed, the main unit will start displaying the interior measurement information.
2. There are 3 different icons to displaying the indoor climate as below:
Comfort level
humidity is lower than 40%; at the same time, the temperature is higher than 20°C, but lower than 27°C.
humidity is higher than 70%, or temperature is lower than 20°C, or temperature is higher than 27°C.
humidity is between 40%-70%, at the same time, the temperature is higher than 20°C, but lower than 27°C.
14