Publicité
Les langues disponibles
Les langues disponibles
Assembling .the .table .stand .and .telephone .cords
Slide the canals of the table stand
into the tracks of the base.
The table stand is mounted when
you hear a click.
Fit the modular contact of the
coiled cord into the plug of the
handset.
Disassembling .the .table .stand
Disconnect the coiled cord and the
wide line cord from the base.
Push the button inside the square
hole next to the modular jack
using a pen or a finger, and pull
the bracket away from the base at
the same time.
Fit the modular contact of the
coiled cord into the plug of the
telephone.
There are two telephone line cords
enclosed. Connect the wide line
cord to the base and to the battery
compartment (OUT).
Connect the narrow line cord to
the battery compartment (IN) and
to the telephone wall outlet.
Trouble .shooting
Q.
My telephone does not work!
A.
Make sure the coiled cord and the line cords are connected
securely to the jacks.
A.
Make sure the batteries are fresh and inserted with correct
polarity.
A.
Push the hook switch once and wait for the dialling tone
again.
A.
If more than one telephone or internet are connected to the
same telephone line, make sure the other telephones are
put on hook.
A.
Try to connect another telephone to the telephone socket.
If the problem persists, it appears that there is a problem
with your telephone line system.
Please consult your network provider.
A.
Make sure the MUTE button is inactive in case the person
you are calling cannot hear you.
Q2.
My phone does not ring!
A2.
Make sure the line cords are connected securely to the jacks.
Q3.
My telephone does not display the caller's telephone
number.
A3.
Make sure your phone line is provided with a caller ID
function from the network provider.
A3.
The caller may have a secret number or suppressed the caller
ID number when making an out-going telephone call.
A3.
If a call is made from abroad or the like, the caller's number
cannot be displayed.
Specifications
Power source
Battery life
Dimensions (incl. table stand)
Weight (incl. table stand)
Disposal
This appliance is labelled in accordance with European directive
2002/96/EG concerning used electrical and electronic appliances
(waste electrical and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling of used
appliances as applicable throughout the EU. Please ask your dealer
about current means of disposal.
- The contents of this manual are subject to change without notice.
- The manufacturer and its suppliers accept no liability whatsoever
for any damage, expense, loss of profits or any other damage
incurred as a result of using this product.
Hereby Bell Xpress A/S declares that this equiment (telephone, type
TP-0062ID) is in compliance with the essential requirements and other
relevant provisions of Directive 999/5/EC.
: pcs. "AA" batteries
: app. 8 months
: 200 x 35 x 85 mm
: app. 830 g
5
Publicité
