Forest-Master FM8 Mode D'emploi page 26

10T Stand
1. Ensure the log splitter is
disconnected from the electricity
supply.
2. Remove the wheels and the
front foot assembly from the log
splitter.
26
3. Attach the wheels you have
removed, to the stand axles. You
can reuse the circlips or use the
additional split pins supplied.
Note that for all models of the FM8,
the bar connecting the front leg to
the rear axle, can be cut to 650mm
in length to shorten it.
4. Attach the rear legs to the log
splitter then mount the splitter on
the stand.
FM8(P) & FM10(D/T/TW/P)