MasterCraft 068-0012-2 Guide D'utilisation page 8

6
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0012-2 | contact us 1-800-689-9928
ASSEMBLY PREPARATION
• Begin the assembly of this cabinet on a clean, level surface.
• Remove all items from the box and ensure that all parts listed on page 3 are
present.
• When installing parts that have more than one screw, tighten all screws by
hand before finishing tightening them with the provided screwdriver (21).
If a power screwdriver is used, keep on a low torque setting.
WARNING
Some parts may have sharp edges. To avoid injury, wearing gloves is recommended during
assembly.
ASSEMBLY INSTRUCTIONS
1. Install Left Side Panel (1-A)
Place the left side-upper panel (1-A1)
and left side-bottom panel (1-A2)
together. Insert the side panel
reinforcement connection part (1-A3)
into the slot of the left side-upper
panel. Use 3 pcs of screw G (42) to
secure from the top side.
Note:
Before tightening screws, make sure
the corners and edges of left side-upper panel
(1-A1) and left side-bottom panel (1-A2) are
completely flush.
2. Install Left Side Panel (2-A)
Repeat Step 1. Place right side-upper
panel (2-A1) and right side-bottom
panel (2-A2) together. Insert side panel
reinforcement connection part (1-A3),
and use 3 pcs screw G (42) to secure
from the top side.
headline bars headline bars headline bars headline bars
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes
notes notes
warnings warnings warnings warnings
#1-A3
#42
#2-A3
#2-A2
#2-A1
#1-A3