MasterCraft 068-0012-2 Guide D'utilisation page 10

8
model no. 062-3582-8 | contact us 1-800-689-9928 model no. 068-0012-2 | contact us 1-800-689-9928
5. Install Key Rod (7-A3)
Attach and insert key rod (7-A3) into the
bottom tab hole of right door-bottom panel
(7-A2). Twist out the pre-assembled screw L
(53) on the key rod linkage plate. Attach key
rod (7-A3) by lining up the screw hole and
retightening screw L (53).
6. Install Top Panel (3) to Left Side Upper
Panel (1-A1) and Right Side Upper
Panel (2-A1).
Attach top panel (3) to left side upper panel
(1-A1) and right side upper panel (2-A1).
Make sure the front of the panel faces
downward. Line up screw holes, and use 6
pcs screw F (41) to secure.
Note:
Before tightening screws, make sure the
bottom corners of left side upper panel (1-A1) and right
side upper panels (2-A1) are completely flush with the
back and front corners of top panel (3).
7. Install Bottom Panel (4) to Left Side
Bottom Panel (1-A2) and Right Side
Bottom Panel (2-A2)
Attach bottom panel (4) to left side-bottom
panel (1-A2) and right side-bottom panel
(2-A2). Line up screw holes and use 6 pcs
screw G (42) to secure.
Note:
Before tightening screws, make sure the
bottom corners of left side-bottom panel and right
side-bottom panels (1-A2, 2-A2) are completely flush
with the back and front corners of bottom panel (4).
headline bars headline bars headline bars headline bars
continuation tabs continuation tabs continuation tabs continuation tabs
notes notes
notes notes
warnings warnings warnings warnings
#53
#7-A3
#52
Back
Front
Back
Front