MasterCraft 068-0012-2 Guide D'utilisation page 11

8. Install Back Panels
(8, 9 and 10)
1) Attach bottom back panel (10 ) onto
both bottoms of left and right side
panels (1-A2 and 2-A2) and bottom
panel (4).
2) Attach both middle back panels (9)
above bottom back panel (10) the
same way. Place the groove of the
middle back panel (9) onto the top
edge of the bottom back panel (10).
3) Line up all the screw holes, and use
24 pcs screw F (41) to secure each
back panel's four sides to back of
cabinet left and right side panels (1-A
and 2-A).
4) Using 18 pcs press knob (63), press
them into the other holes to attach all
back panels.
Note:
Do not fully tighten screw F (41) before
the press knobs (63) are secured.
9. Install Levelling Feet (6-1)
Install levelling feet (6-1) into the four
corners of bottom panel (4). Use
wrench (25) to tighten.
Note:
Rotate/stand cabinet upright after this
step.
#8
#41
9
#9
#9
#10
#63
#6-1