Making The Wheelchair Smaller - Life & Mobility CANTOnxt Mode D'emploi

fig. 5
131635AJ_CantoNxt-Handleiding_NL_EN_FR_DE.indd 23 131635AJ_CantoNxt-Handleiding_NL_EN_FR_DE.indd 23

Making the wheelchair smaller

Removing the seat (see fig. 1)
n Pull up the back of the seat.
n Lift the seat out of the frame.
Remove the backrest from the backrest frame
(see fig. 2)
n Lift the left and right knobs of the top
fig. 1
fittings at the same time.
n Rotate the backrest forward so that
the U profile releases from the backrest
attachment points.
n Release the knobs of the top fittings.
n Lift out the backrest.
fig. 2
Removing the legrests (see fig. 3)
fig. 3
1. Remove the leg rests from the top.
Side equipped with armrest (see fig. 4)
n Loosen the star knob at the bottom of the
sides.
n Lift the entire side upwards out of the seat
frame.
Removing the headrest (see fig. 5)*
n Loosen the star knob.
n Remove the headrest from the wheelchair.
Backrest tubes (see fig. 6)
n Loosen the socket screws in the backrest
hinge points.
n Move the backrest frame towards the seat
frame.
fig. 4
n Retighten the socket screws.
* If applicable
fig. 6
EN23
23-12-2019 10:12:10 23-12-2019 10:12:10