Plebani Swing Instructions page 18

BEFORE USING THIS ARTICLE, READ CAREFULLY THE INSTRUCTIONS AND THE
SEQUENCE OF ASSEMBLY TO AVOID UNNECESSARY HAZARDS TO YOUR CHILD.
THROW AWAY AND REMOVE ALL POLY BAGS OF PACKING, THEY MIGHT BE RISKS
OF SUFFOCATION FOR YOUR BABY!
NEVER LEAVE YOUR CHILD UNATTENDED!
To assemble our swing chair it's enough to match the letters on pieces one each
other (As illustrations from Page 2). It is important that the letters are close and
coincident (A with A, B with B, etc.).
ASSEMBLING OF THE FRAME:
1- After remove and thrown away the packing, insert the back leg frame inside its proper
hole of side joint, the one with toys, marked with the letter "B" (Fig. 1) well to the end
(CLICK). Insert the other leg, marked "A" (Fig. 2) well to the bottom (CLICK) and turn
until the open position (Fig. 2).
2- Make same operations for the other side; insert the rear leg "D" (Fig. 3), then the front
leg "C" and then rotate to open position (Fig. 4).
3- Insert the front feet "E" in both legs pushing right to the end (Fig. 5 and 6). Insert the rear
feet "F" (Fig. 7 and 8).
Now the frame is assembled. Make sure that all components are securely and correctly
assembled and the structure is stable.
ASSEMBLING OF THE SEAT:
4- Insert the support frame of the seat "H" in both holes (Fig. 9) well to the end (CLICK) and
check that both springs are out from holes. Let fabric well fix on the seat frame (Fig. 10),
close the two buttons under the back-rest by passing the fabric around the support metal
drawn (Fig. 10). Tightly close the three buttons of the seat support (Fig. 11).
5- Insert side support frame "G" in its hole (Fig. 12) until the complete release of the spring
"CLICK". Insert the other pipe on the other side until the complete release of the spring
"CLICK".
6- Insert the fixing frame behind the back-rest in its holes (Fig. 13) until the complete
release of the spring "CLICK".
7- Our swing is provided with a practical and functional tray. To fix it to the seat, place it on
its special supports on the sides of the seat, fixing it well on both sides, pushing well
down (CLICK) (Fig. 14). To remove it, lift the side tabs and lift it.
18
IMPORTANT!: