Bunn SPEED BREW GRX Manuel Du Propriétaire page 17

TROUBLESHOOTING
COFFEE DOESN'T
COME OUT
NEED HELP?
• Were at least 20oz of water poured into the coffee maker? Between 20oz and 50oz of
water must be poured in for proper brewing. (See HOW TO BREW section of manual).
• Check that pour-in lid is closed. Water is not released from the reservoir to the tank
until the lid is closed.
• If coffee maker has been left ON for an extended period without being used, the
water level in the tank may need to be topped off. Press power switch OFF, unplug the
coffee maker, and go through the setup process until water begins to flow as directed
in the INITIAL SETUP section of the manual.
• Has the coffee maker been in storgage. Go through the initial setup as directed in the
INITIAL SETUP section of the manual.
• If there is still water in the pour-in bowl, the sprayhead may be clogged. Clean the
sprayhead as directed in the CLEANING THE SPRAYHEAD section of the manual.
• If the previous solutions do not work, you may need a deliming tool to remove
excess lime build-up. One can be obtained by completing an online form at
www.bunn.com/home-products/parts-form or by calling 1-800-352-2866 (USA) or
1-800-263-2256 (Canada).
• Visit https://retail.bunn.com/support/products
• Call 1-800-352-2866 (USA) or 1-800-263-2256 (Canada)
17