LaserLiner Greenline-Laser 3P Manuel page 14

Hand receiver mode
4
Optional: Working with the laser receiver GRX
Use an GRX laser receiver (optional) to carry out levelling at great distances
or when the laser lines are no longer visible.
To work with a laser receiver, switch the line laser into hand receiver mode
with the Hand receiver mode button (10). The laser lines will now pulsate
with high frequency, making the laser lines darker. The laser receiver GRX
can detect these pulsating laser lines.
Green lasers can only be used with special laser receivers, which are
available on request.
!
Follow the operating instructions of the corresponding laser receiver.
14 GB