VONROC GT502AC Traduction De La Notice Originale page 9

5. MAINTENANCE
Make sure that the machine is not live when
carrying out maintenance work on the
motor.
The machines have been designed to operate over
a long period of time with a minimum of mainte-
nance. Continuous satisfactory operation depends
upon proper machine care and regular cleaning.
• Turn off the power and pull out the plug before
you clean and store the machine.
• The machine requires no additional lubrication.
• Clean the housing and other parts with a mild
cleanser and moist cloth.
• Never use aggressive cleansers or solvents.
• Prevent water from getting into the machine.
• Do not leave the trimmer resting on the floor for
extended periods as it could cause the shape
of the guard to alternate, posing a safety risk.
Hang it off the floor by the top handgrip
Cleaning
Regularly clean the machine housing with a soft
cloth, preferably after each use. Keep the ventila-
tion slots free from dust and dirt. If the dirt does
not come off use a soft cloth moistened with soapy
water. Never use solvents such as petrol, alcohol,
ammonia water, etc. These solvents may damage
the plastic parts.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EC
for Waste Electrical and Electronic Equipment and its
implementation into national right, power tools that
are no longer usable must be collected separately
and disposed of in an environmentally friendly way.
WWW.VONROC.COM
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
EN
9