Product Description - MW TOOLS WD70 Mode D'emploi

M1.1.WD70-WD100-WD170.NLFREN - 25042019
EN
Electricity:
• The electrical system to which the appliance is connected must comply with current legislation. Installation requires a
residual current circuit breaker (RCCB) in the main electrical distribution board.
• Unplug the appliance before performing any maintenance operations.
• Always check the power cable before using the appliance. It must not be bent, taut, stretched, crushed or any way
damaged.
• The power cable must be replaced by qualified personnel only. Use an original power cable only with a 3-pin approved
plug.

2 Product description

Diesel or kerosene direct-fired mobile/portable space heater with open combustion chamber.
Model
Heat input*
Air flow rating
Fuel type
Fuel consumption
Voltage
Air pressure setting
Current rating
Electrical power
Fuse rating
Dimensions
Net weight
Length
Width
Height
Tank capacity
Operating range
Standard accessories
Fuel gauge
Handle
Ambient thermostat
Malfunction detection light
* Based on Gross Calorific Value (Hrs)
WD70
20 kW
550 m³/h
Diesel/Kerosene
1.9 l/h
AC 220-240 V / 50 Hz
0.32 bar
1.1 A
230 W
T3.15 A
14 kg
750 mm
315 mm
415 mm
19 l
~ 10 h
Yes
1
Built-in
Built-in
WD100
30 kW
720 m³/h
Diesel/Kerosene
2.8 l/h
AC 220-240 V / 50 Hz
0.31 bar
1.1 A
230 W
T3.15 A
21 kg
880 mm
456 mm
590 mm
38 l
~ 13 h
Yes
1
Built-in
Built-in
19
WD170
50 kW
1100 m³/h
Diesel/Kerosene
4.7 l/h
AC 220-240 V / 50 Hz
0.45 bar
1.5 A
340 A
T3.15 A
27 kg
1090 mm
490 mm
585 mm
56 l
~ 12 h
Yes
1
Built-in
Built-in