Important Precautions Regarding The Peristaltic Pump; Further Information - Norsup UNO Notice D'utilisation

SALT CHLORINATOR TYPE OCEANCLEAR LS
IMMEDIATE IMMEDIATE
MESSAGE AUTOMATIC ACTION IMMEDIATE
MESSAGE AUTOMATIC ACTION
IMMEDIATE
DISPLAYED / MESSAGE AUTOMATIC ACTION
DISPLAYED /
MESSAGE AUTOMATIC ACTION IMMEDIATE
Stopping Stopping
DISPLAYED /
FAULT FAULT Stopping
MESSAGE Stopping IMMEDIATE
DISPLAYED / Stopping
MESSAGE AUTOMATIC ACTION pH
IMMEDIATE pH
DISPLAYED FAULT AUTOMATIC ACTION
DETECTED Stopping IMMEDIATE Stopping
DETECTED production production
FAULT Stopping pH
DISPLAYED / MESSAGE AUTOMATIC ACTION regulation
regulation
/ FAULT
DETECTED
MESSAGE production AUTOMATIC ACTION
pH
Stopping Stopping Stopping pH
regulation
DETECTED DETECTED FAULT production
DISPLAYED / Stopping
production regulation
DISPLAYED / regulation
pH Stopping
IMMEDIATE
DETECTED FAULT Stopping Stopping
production
IMMEDIATE IMMEDIATE
FAULT IMMEDIATE MESSAGE Stopping AUTOMATIC ACTION pH
IMMEDIATE regulation
DETECTED
production pH
MESSAGE AUTOMATIC ACTION
MESSAGE AUTOMATIC ACTION
MESSAGE AUTOMATIC ACTION DISPLAYED /
DETECTED MESSAGE production AUTOMATIC ACTION regulation
Stopping
regulation
DISPLAYED / DISPLAYED /
DISPLAYED / FAULT Stopping
DISPLAYED /
Stopping Stopping
Stopping CAUSE
Stopping
FAULT
FAULT Stopping Stopping
FAULT Stopping DETECTED production
FAULT Stopping
pH
pH
pH regulation
pH
DETECTED DETECTED production
production
DETECTED production
DETECTED production
regulation regulation
regulation
regulation
Insufficient water flow
Insufficient water flow
Insufficient water flow
Yes Yes Yes Yes through through
Yes Yes
Insufficient water flow
Yes Yes through
circuit.
circuit.
Yes Yes circuit. through
Insufficient water flow
circuit.
Yes Yes through
Insufficient water flow
Yes Yes
circuit.
Yes Yes through
Insufficient water flow Insufficient water flow
Insufficient water flow Yes
Insufficient water flow
circuit.
Yes Yes through
Yes Yes through
Yes Yes through the filtration
Yes Yes through
circuit. circuit.
circuit.
circuit.
Loss of communication
Loss of communication
Loss of communication
between
between
between
Loss of communication
Yes No
Yes Yes No No board and the power board and the power
Yes No board and the power
between
Loss of communication
board of the electronics
board of the electronics board of the electronics
Yes No board and the power
between
unit. unit. Loss of communication
unit.
Loss of communication
board of the electronics Loss of communication
Yes No board and the power
Loss of communication
Yes No Loss of communication
between
pH
pH pH
between between
between Yes the board of the electronics unit.
No No No No between
No No
Yes No board and the power
calibrated. calibrated.
Yes No calibrated. board and the power
Yes No board and the power
Yes No board and the power
Yes No unit. pH board and the power
No No board of the electronics
board of the electronics board of the electronics
No board of the electronics No
board of the electronics
calibrated. pH
unit. unit.
unit.
No No No No
unit.
unit.
calibrated.
No
pH pH
pH
pH probe incorrectly
pH
No No
No No
No No
No No
No No
calibrated.
calibrated.
calibrated.
calibrated. calibrated.
Series of 5 unsuccessful
Series of 5 unsuccessful
Series of 5 unsuccessful
No Yes attempts to correct the
No Yes attempts to correct the
No Yes attempts to correct the
Series of 5 unsuccessful
pH.
pH.
pH.
No Yes Series of 5 unsuccessful attempts to correct the
Series of 5 unsuccessful
Series of 5 unsuccessful
Series of 5 unsuccessful No
No Yes Series of 5 unsuccessful
pH.
No Yes attempts to correct the
No Yes
No No Yes Yes attempts to correct the attempts to correct the
No Yes attempts to correct the Series of 5 unsuccessful
No Yes attempts to correct the
pH.
pH.
pH.
No pH. Yes attempts to correct the
pH.
pH.
Insufficient amount of
Insufficient amount of
Insufficient amount of
Yes Yes water in the filtration
Yes Yes Yes Yes water in the filtration water in the filtration
circuit.
Insufficient amount of
Insufficient amount of
Insufficient amount of
circuit.
Insufficient amount of Yes circuit.
Insufficient amount of
Yes Yes water in the filtration
Insufficient amount of
Yes Yes water in the filtration
Yes Yes Yes Yes water in the filtration
Yes Yes water in the filtration
Yes Yes water in the filtration
Yes Yes circuit. water in the filtration
circuit.
circuit.
ORP measurement out of
circuit.
Insufficient amount of circuit.
circuit.
tolerance for 48 hours ORP measurement out of ORP measurement out of
Yes Yes water in the filtration
Yes Yes
tolerance for 48 hours
Yes No (difference of ± 400 mV tolerance for 48 hours
circuit. ORP measurement out of
ORP measurement out of
ORP measurement out of
ORP measurement out of
ORP measurement out of
Yes No compared to the ORP (difference of ± 400 mV
Yes No (difference of ± 400 mV
tolerance for 48 hours
tolerance for 48 hours
tolerance for 48 hours Yes
ORP measurement out of tolerance for 48 hours tolerance for 48 hours
setpoint).
Yes No compared to the ORP compared to the ORP (difference of ± 400 mV
Yes No (difference of ± 400 mV
Yes No (difference of ± 400 mV
Yes Yes No No (difference of ± 400 mV (difference of ± 400 mV
tolerance for 48 hours
Yes No
setpoint). ORP measurement out of compared to the ORP
setpoint). compared to the ORP
compared to the ORP
compared to the ORP
compared to the ORP
Yes No (difference of ± 400 mV
setpoint).
tolerance for 48 hours setpoint).
setpoint).
setpoint).
setpoint).
compared to the ORP
Yes No (difference of ± 400 mV
setpoint).
compared to the ORP
18 WWW.NORSUP.EU
setpoint).
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
Check that : Check that :
CAUSE CHECKS AND REMEDIES
Check that :
OPTION TO
the flow sensor is connected
the flow sensor is connected
Check that :
Check that :
the flow sensor is connected DEACTIVATE
to the electronics unit. to the electronics unit.
CAUSE CHECKS AND REMEDIES
• the flow sensor is connected Check that : the flow sensor is connected
VIA THE
to the electronics unit.
CAUSE CHECKS AND REMEDIES
CAUSE CHECKS AND REMEDIES
pH CHECKS AND REMEDIES the flow sensor is activated the flow sensor is activated
CAUSE CHECKS AND REMEDIES
to the electronics unit.
Check that :
to the electronics unit.
the flow sensor is connected MENU
the flow sensor is activated
Check that :
• the flow sensor is activated
(« («
the flow sensor is connected
«
to the electronics unit. the flow sensor is activated
(« »
(« »
the flow sensor is connected
menu).
menu).
Insufficient water
Check that : to the electronics unit. »
(«
menu). menu). the flow sensor is activated
flow Check that : to the electronics unit.
Check that : the valves on the filtration
the valves on the filtration
Check that : the flow sensor is activated the flow sensor is connected
Check that : • the valves on the filtration
menu). («
the the filtration filtration the valves on the filtration
through the
the flow sensor is connected
the flow sensor is connected the flow sensor is activated
the filtration circuit are open.
the flow sensor is connected circuit are open. circuit are open. to the electronics unit.
the flow sensor is connected («
filtration circuit are open. the valves on the filtration menu).
to the electronics unit. to the electronics unit.
• the filtration pump is
the to the electronics unit. filtration («
to the electronics unit. the filtration the flow sensor is activated pump
the menu). filtration pump
circuit.
circuit are open.
the the valves on the filtration filtration pump is
working correctly.
Insufficient water flow the flow sensor is activated the flow sensor is activated
the flow sensor is activated menu). («
the flow sensor is activated
the filtration working correctly.
working correctly. the valves on the filtration
• the filtration circuit is not working correctly.
(« circuit are open. the filtration pump »
through the filtration (« »
(« menu). »
(« »
the valves on the filtration
the filtration circuit is not circuit are open.
blocked. the filtration circuit is not
Insufficient water flow
the filtration the filtration circuit is not menu). menu). working correctly.
circuit. the filtration pump
menu). the valves on the filtration
menu).
• there is enough water in the circuit are open.
Yes through the filtration blocked. the filtration
blocked.
blocked. the valves on the filtration the valves on the filtration
the valves on the filtration the filtration circuit is not working correctly. circuit are open.
the valves on the filtration
the filtration pool.
the filtration
the filtration pump
circuit. working correctly. No
the filtration there is enough water in the
circuit are open. there is enough water in the
circuit are open.
circuit are open. there is enough water in the
circuit are open. blocked. the filtration pump
the filtration circuit is not
Loss of communi- working correctly.
the filtration circuit is not
the pool. pool. filtration pump is
the filtration pump is
the filtration pool. pump working correctly. is
the filtration pump is
there is enough water in the
blocked.
cation
working correctly. the filtration circuit is not blocked.
working correctly.
working correctly. the filtration circuit is not
working correctly.
between the pool.
there is enough water in the
the filtration circuit is not
the filtration circuit is not blocked. there is enough water in the
the the filtration circuit is not control blocked.
control the control the filtration circuit is not
the control
pool.
blocked. blocked.
pool.
board and the blocked. Contact a professional. there is enough water in the
blocked. there is enough water in the
Contact a professional. Contact a professional.
Contact a professional.
the control
there is enough water in the there is enough water in the
power
Loss of communication there is enough water in the pool.
there is enough water in the pool.
board of the Contact a professional. pool.
the control pool.
between Loss of communication pool. the control
pool.
electronics
Contact a professional.
between the control
board and the power Contact a professional.
the control
probe incorrectly unit. Carry out a calibration of the
probe probe incorrectly incorrectly Carry out a calibration of the Carry out a calibration of the
the the control control
No control board and the power Contact a professional.
the control
board of the electronics
Contact a professional.
pH probe. pH probe.
Contact a professional. pH probe.
pH probe Contact a professional.
board of the electronics Contact a professional. No
probe incorrectly Contact a professional. Carry out a calibration of the
unit.
Carry out a calibration of
Ensure the pH corrector
Ensure the pH corrector
incorrectly unit. Ensure the pH corrector
probe incorrectly pH probe. Carry out a calibration of the
pH probe incorrectly Carry out a calibration of the
the pH probe.
container is not empty.
pH probe incorrectly container is not empty. Carry out a calibration of the
calibrated. container is not empty.
pH probe.
No calibrated. Ensure the pH corrector pH probe.
probe probe incorrectly incorrectly Carry out a calibration of the Carry out a calibration of the
probe incorrectly Carry out a manual injection Carry out a calibration of the
calibrated. Carry out a calibration of the pH probe.
probe incorrectly Carry out a calibration of the Carry out a manual injection
Carry out a manual injection
• Ensure the pH corrector container is not empty. Yes
Ensure the pH corrector Ensure the pH corrector
pH probe.
pH probe.
pH probe.
pH probe. (menu « pH probe.
Ensure the pH corrector
(menu «
(menu «
container is not empty. container is not empty.
container is not empty. Carry out a manual injection
Ensure the pH corrector Ensure the pH corrector
Ensure the pH corrector container is not empty. »).
Ensure the pH corrector
Ensure the pH corrector
»). »).
• Carry out a manual container is not empty. (menu « Carry out a manual injection
container is not empty. Carry out a manual injection
container is not empty. Carry out a manual injection
Check the condition of the container is not empty.
container is not empty.
Check the condition of the
Check the condition of the
Carry out a manual injection (menu «
injection (menu « Carry out a manual injection »).
Carry out a manual injection (menu « (menu «
Carry out a manual injection
filter with ballast and
Carry out a manual injection
filter filter with with ballast ballast
(menu « (menu «
»).
(menu « Check the condition of the »). »).
(menu « »).
injection connector.
(menu «
injection connector.
injection connector. »).
»).
»). Check the condition of the Check the condition of the
filter with »). ballast
Series of 5 • Check the condition of Check the condition of the
Check the settings in the
»).
Check the condition of the
Check the condition of the Check the settings in the Check the settings in the
Series of 5 unsuccessful Check the condition of the filter with ballast
Series of 5 unsuccessful Check the condition of the filter with ballast
injection connector.
unsuccessful « the filter with ballast filter with ballast »,
filter filter Check the condition of the with with ballast ballast and and
«
Yes attempts to correct the filter with ballast « and injection connector.
attempts to correct the filter with injection connector. ballast and
Check the settings in the injection connector.
attempts to « and injection connector. »
injection connector.
injection connector.
pH. injection connector. filter with Yes ballast
injection connector. « Check the settings in the
pH. «
Check the settings in the
and « Check the settings in the « »
correct the • Check the settings in the
Check the settings in the Check the settings in the
Check the settings in the «
Check the settings in the injection connector.
and « and «
«
menus. «
« « »,
pH. « « », »,
« « »,
« »,
menus. Check the settings in the
menus. «
Carry out a calibration of the « « and « » »
«
« and « »
« « » »
«
Carry out a calibration of the Carry out a calibration of the and «
and « »
pH probe. and « »
menus.
and « and « menus. »
and « »
and « »
«
pH probe. menus.
pH probe.
menus. menus.
menus.
menus. Carry out a calibration of the menus. Carry out a calibration of the
menus.
Check that the filtration pump
and «
Carry out a calibration of the
Carry out a calibration of the Carry out a calibration of the
Carry out a calibration of the pH probe.
Carry out a calibration of the
Carry out a calibration of the pH probe.
Check that the filtration pump
Check that the filtration pump
• Carry out a calibration of
is running correctly.
pH probe. menus. pH probe.
pH probe.
Insufficient amount of pH probe.
pH probe.
pH probe.
is running correctly.
is running correctly. Check that the filtration pump
the pH probe.
Insufficient amount of Carry out a calibration of the
Check that the filtration pump
Yes water in the filtration
Carry out a « Check that the filtration pump
Check that the filtration pump Check that the filtration pump
Check that the filtration pump is running correctly.
Check that the filtration pump
water in the filtration pH probe.
circuit. is running correctly. Yes
Insufficient Check that the filtration pump
Carry out a «
is running correctly. is running correctly. Carry out a «
».
is running correctly. is running correctly.
is running correctly.
circuit.
Carry out a «
amount of Check that the filtration is running correctly.
».
Carry out a calibration of the ».
Check that the filtration pump
Carry out a « Carry out a «
Carry out a «
Carry out a « ».
Carry out a « Carry out a «
water in the pump is running
Carry out a calibration of the
ORP measurement out of ORP probe. Carry out a calibration of the
is running correctly. ».
». ».
Carry out a «
». Carry out a calibration of the
». ».
filtration correctly.
tolerance for 48 hours Go to the « ORP probe.
ORP probe.
ORP measurement out of Carry out a calibration of the
Carry out a calibration of the
Carry out a calibration of the Carry out a calibration of the ». ORP probe.
Carry out a calibration of the
Carry out a calibration of the
No (difference of ± 400 mV Carry out a «
circuit. Go to the « » menu and check
tolerance for 48 hours ORP probe. ORP probe. Go to the «
ORP probe.
ORP probe. ORP probe. Go to the «
Carry out a calibration of the
ORP probe.
compared to the ORP Yes
».
that the production setpoint
(difference of ± 400 mV Go to the « Go to the « » menu and check » menu and check
Go to the « » menu and check
Go to the «
Go to the «
ORP probe.
setpoint). Go to the «
is at 100 %. Carry out a calibration of the » menu and check
» menu and check
compared to the ORP that the production setpoint that the production setpoint
» menu and check that the production setpoint
» menu and check
» menu and check
Go to the « » menu and check
that the production setpoint that the production setpoint
ORP probe.
setpoint). that the production setpoint is at 100 %. is at 100 %.
that the production setpoint is at 100 %.
that the production setpoint
that the production setpoint » menu and check
is at 100 %.
is at 100 %.
is at 100 %. Go to the «
is at 100 %.
is at 100 %. that the production setpoint is at 100 %.
» menu and check
Alterations which serve the technological progress as well as errors excepted!
is at 100 %.
that the production setpoint
SALT CHLORINATOR TYPE OCEANCLEAR LS
No
No
OPTION TO OPTION TO
OPTION TO DEACTIVATE
DEACTIVATE
OPTION TO
DEACTIVATE VIA THE
VIA THE
DEACTIVATE OPTION TO
VIA THE
MENU MENU
OPTION TO MESSAGE
VIA THE
DEACTIVATE
OPTION TO
DEACTIVATE MENU DISPLAYED
« OPTION TO
«
MENU
VIA THE DEACTIVATE
VIA THE / FAULT
«
DEACTIVATE
»
»
MENU « MENU DETECTED
VIA THE
»
VIA THE
OPTION TO Yes
»
« MENU
Yes
OPTION TO OPTION TO
DEACTIVATE MENU
OPTION TO
«
»
DEACTIVATE
DEACTIVATE
VIA THE
DEACTIVATE «
»
VIA THE VIA THE
MENU
VIA THE
»
MESSAGE
MENU
MENU
MENU «
MESSAGE
» »
« « DISPLAYED
»
«
Yes
» DISPLAYED
»
/ FAULT
»
» Yes
/ FAULT
DETECTED production
»
No No
No
DETECTED
No
»
» No
is
is
»
No
is
No
No
is
pump is No
No
No
is
No
is
No
No No
No
No
No
No
No
Yes Yes
Yes
No
No
No
No
Yes
Yes
Yes Yes
Yes
Yes
Yes
Yes
Yes

3.7.3. IMPORTANT PRECAUTIONS REGARDING THE PERISTALTIC PUMP

3.7.3. Important precautions regarding the peristaltic pump
3.7.3. Important precautions regarding the peristaltic pump
When one of the 2 messages below is displayed, the peristaltic pump is running.
and and
When one of the 2 messages below is displayed, the peristaltic pump is running.
Yes
Yes
Yes
and
and
and
Yes
and
»,
», Yes or
Yes
Yes
Yes
Yes Yes
and or
» Yes
»
»,
», Yes
» »
»,
»
»,
»
»
I
»
»
»
»,
I
»
In this case, never remove the front panel of the electronics unit.
»
»
In this case, never remove the front panel of the electronics unit.
»
Yes
If case of doubt about the correct functioning of the peristaltic pump :
Yes Yes
If case of doubt about the correct functioning of the peristaltic pump :
1) Switch off the electronics unit.
Yes
2) Remove the front cover of the electronics unit.
Yes 1) Switch off the electronics unit.
Yes
Yes Yes
Yes
3) Remove the flexible hose inside the peristaltic pump.
2) Remove the front cover of the electronics unit.
Yes
4) Carry out a manual vacuum injection. 3) Remove the flexible hose inside the peristaltic pump.
4) Carry out a manual vacuum injection.
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes Yes
Yes
Yes

3.8. Further information

3.8. Further information
Yes
Menu
Alterations which serve the technological progress as well as errors excepted!
15
Menu
Carry out a manual injection
(menu «
Series of 5 unsuccessful
(menu «
No Yes attempts to correct the
Series of 5 unsuccessful Check the condition of the
Series of 5 unsuccessful Check the condition of the
pH.
Series of 5 unsuccessful filter with
No Yes attempts to correct the
Series of 5 unsuccessful
No Yes attempts to correct the filter with
Yes attempts to correct the pH. injection connector.
Yes attempts to correct the pH. injection connector.
pH.
Check the settings in the
pH.
Check the settings in the
«
«
«
«
and «
and «
menus.
menus.
IMMEDIATE CAUSE
Carry out a calibration of the
AUTOMATIC ACTION Carry out a calibration of the
Insufficient amount of
pH probe.
Insufficient amount of
pH probe.
Insufficient amount of
Stopping Yes Yes Stopping pH water in the filtration
Insufficient amount of
Yes Yes water in the filtration
Check that the filtration pump
Insufficient amount of Yes Yes water in the filtration
production regulation
circuit.
Yes water in the filtration Check that the filtration pump circuit.
Yes water in the filtration circuit. is running correctly.
circuit.
is running correctly.
circuit.
Carry out a «
IMMEDIATE
Carry out a « ORP measurement out of
ORP measurement out of
».
ORP measurement
ORP measurement out of
IMMEDIATE
AUTOMATIC ACTION ORP measurement out of
tolerance for 48 hours ».
tolerance for 48 hours
out of tolerance for Carry out a calibration of the
ORP measurement out of tolerance for 48 hours
AUTOMATIC ACTION
tolerance for 48 hours Yes No (difference of ± 400 mV
Carry out a calibration of the
48 hours
Yes tolerance for 48 hours No (difference of ± 400 mV ORP probe.
Yes No CAUSE (difference of ± 400 mV
Yes Stopping No
No (difference of ± 400 mV
ORP probe. compared to the ORP
Stopping (difference of ± 400
No (difference of ± 400 mV CAUSE compared to the ORP Go to the «
Stopping compared to the ORP
pH
compared to the ORP setpoint).
mV compared to Go to the «
Stopping
compared to the ORP setpoint). » menu and check
pH setpoint).
regulation setpoint). the ORP setpoint).
» menu and check
production
setpoint). that the production setpoint
regulation
that the production setpoint
is at 100 %.
is at 100 %.
Salt level less than 2.5 g/L
Salt level less than
Salt level less than 2.5 g/L
(or 1.5 g/L if Low Salt
2.5 g/L (or 1.5 g/L if
(or 1.5 g/L if Low Salt
equipment).
Low Salt
equipment).
equipment).
Yes No
Yes No
Yes No
Insufficient amount of
Insufficient
Insufficient amount of
water in the filtration
amount of water
water in the filtration
circuit.
circuit. in the filtration
circuit.
Real-time timer countdown
Real-time timer countdown
Meaning
Meaning
Check the condition of the
(menu «
»).
filter with ballast »). and
»).
Check the condition of the
»).
injection connector. Check the condition of the Yes
filter with ballast and
filter with ballast and
Check the settings in the
ballast and
injection connector. Yes
ballast and injection connector. Yes
« »,
Yes
Check the settings in the
Yes
Check the settings in the
« « » »,
« »,
»,
« »
and « »
», « »
» and « »
menus.
» and « »
»
menus.
EN
Carry out a calibration of the
» menus.
Carry out a calibration of the
pH probe.
Carry out a calibration of the
CHECKS AND REMEDIES OPTION TO
pH probe.
pH probe. DEACTIVATE
Check that the filtration pump
VIA THE
Check that the filtration pump
Yes
Check that the filtration pump Yes
MENU
is running correctly. DE
is running correctly. Yes
Yes
is running correctly.
Yes
Carry out a « Carry out a «
Carry out a «
• Carry out a
».
».
OPTION TO
« ». ».
Carry out a calibration of the
OPTION TO
Carry out a calibration of the
DEACTIVATE
• Carry out a calibration of the Carry out a calibration of the NL
ORP probe.
ORP probe. DEACTIVATE
ORP probe. Yes
ORP probe. VIA THE
Yes
CHECKS AND REMEDIES Go to the « Yes
• Go to the Yes
Yes
VIA THE
Go to the « Go to the «
MENU
CHECKS AND REMEDIES Yes » menu and check
« »
» menu and check
MENU
» menu and check
«
menu and check
that the production setpoint
that the production setpoint
« FR
that the production setpoint
• that the production setpoint »
is at 100 %.
is at 100 %.
is at 100 %.
»
is at 100 %.
Check the salt levels in the
• Check the salt levels in the Check the salt levels in the
pool using a recent testing
pool using a recent testing pool using a recent testing
kit.
DK
kit. kit.
Top up with salt if
15
15
15
• Top up with salt if Top up with salt if
necessary, so as to obtain a
necessary, so as to obtain a
necessary, so as to obtain a salt level of 5 kg/m (or 2.5
3
salt level of 5 kg/m 3 (or 2.5
salt level of 5 kg/m3 (or 2.5 kg/m 3 for Low Salt
SE
Yes
kg/m 3 for Low Salt
kg/m3 for Low Salt equipment).
Yes
Yes
equipment).
equipment).
Check that the pipe at the
Check that the pipe at the
level of the salt sensor is
• Check that the pipe at the
level of the salt sensor is
completely filled with
level of the salt sensor is
completely filled with
water.
completely filled with
water.
If necessary, top up the
water.
If necessary, top up the
water in the pool.
• If necessary, top up the
water in the pool.
water in the pool.
ORIGINAL MANUAL NORSUP 19
15
15