Table des Matières
Publicité
sigfox REFERENCE TRANSMITTER - Guide utilisateur / User guide version V1.0.0
3.
REPLACING THE BATTERY
3.1. Replacing the battery
When the low battery indicator is activated (flashing of the red LED), it is possible to change the internal battery of
the unit.
It is important to use a battery of the same reference, SAFT LS14500.
Procedure to change the battery:
1. Turn off the product with the black hardware switch
2. Remove the transparent bottom cover
3. Remove the battery and replace it with the new one respecting the polarity as indicated on the electronic card
4. Close the unit
5. Turn on the product with the black hardware switch
Battery location
-
Disposition of the battery on the card
+
FR
EN
Page
Page
15
15
of 30
of 30
Publicité
Table des Matières
