Techly I-ALARM-KIT002 Manuel D'installation page 6

Connect the device to your WiFi network
1) Before you can set up the Wifi connection of the alarm system
2) Go to Smartphone Wi-Fi settings without closing the APP
3) Connect the Smartphone to the alarm system through the Wi-Fi
4) Return to APP
5) Wait for the notification "Open Wi-Fi network available" (wait
6) From the APP account select "Add Device"
7) Once your smartphone is connected to the Wi-Fi network of the
Make sure that your device is set to its setting "Detect open wireless networks"
6
please make sure your smartphone is connected to the alarm
system own Wi-Fi network
network
at least 3 minutes). Make sure that the setting "Detects open
wireless networks" is enable on the device
alarm system, the smartphone should be able to detect the product
ID. If not, press the "Get ID Alarm" to request the product ID. If for
some reason the product ID is still not available, reset the WiFi
module of the alarm system (see chapter "How to reset the WiFi
network settings")