Télécharger Imprimer la page

Techly I-ALARM-KIT002 Manuel D'installation page 16

Publicité

Les langues disponibles

Les langues disponibles

Alarm notifications
The alarm system will check the programmed phone numbers one by one.
Firstly every registered user will get a push notification using the Wi-Fi internet
connection. If the alarm system is not disarmed the alarm system will send a text
message one by one to the programmed phone numbers. When this is fulfilled
the alarm system will start calling the programmed phone numbers. If one of
the phone number has the voicemail enabled the system will call the next phone
number. Between every text message and phone call there will be a time span of
approximately 15 seconds (depending on additional voicemail duration).
Push notification 1
Push notification 2
Push notification 3
Push notification 4
Push notification 5
If the alarm system is switched off during the notification process the alarm
system will stop sending/calling the remaining phone numbers. For example:
Phone number 2 receives a text message notification and switches off the alarm
system via the APP, phone number 3 will not receive a text message.
Arm or disarm the alarm system by APP
1) First select the status of you alarm system
2) Then select the type of communication you wish to use to set up the alarm
system, SMS or Wi-Fi
16
SMS 1
SMS 2
→ SMS 3
→ TEL 1 → TEL 2 → TEL 3 → TEL 4→ TEL 5
SMS 4
SMS 5

Publicité

loading