Maintenance And Cleaning - SW-Stahl 10207L Instructions D'utilisation

10207L

MAINTENANCE AND CLEANING

MAINTENANCE PERSONAL should be qualified and trained in the compressor
functions and failure modes, their rectification, operation and maintenance of the
product.
•
Regular check period: 1 month. If you find any damage or deformation,
please stop use immediately and ask your manufacturer for help. Never try to
repair the product yourself.
•
Always keep the unit clean. Especially make sure the coil
spring compressor is dry.
•
Store the unit in a dry place not causing corrosion. Always pack away the
jaws with the coil spring compressor as delivered.
•
Grease the guide spindle if necessary, or at least every six months. Always
clean the spindle before applying grease.
•
For all inquiries/spare parts ordering please include the serial number. Ask
manufacturer for help. Unauthorized parts are forbidden.
Recommended grease: graphite grease
GUARANTEE
This tool carries a guarantee according to current law.
Subject to change without any notice.
SW-Stahl GmbH
An der Hasenjagd 3
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438- 40
E-Mail: info@swstahl.de
www.swstahl.de