Samsung VCDC08 Serie Guide De L'utilisateur page 69

troubleshooting
pROBLEM
Motor dows not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner dows not pick
up dirt.
Low or decreasing suction
Body overheating
Static electicity discharge
This Vacuum cleaner is approved the following.
EMC Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
SOLUTION
• Check cable, pulg and socket.
• Leave to cool.
• Check for blockage and remove.
• Pull the cord out 2-3m and push down the cord
rewind button.
• Check hose and replace if required.
• Please check filter and, if required, clean as
illustrated in the instructions. if filters are out of
condition change them to new ones.
• Please check filters, If required clean as
illustrated in the instruction.
• Please decrease power suction.
troubleshooting _15