Beaba ZEN PREMIUM Notice D'utilisation page 27

Step 2:
Enter a username and a password that will be used for your connection
on the app then press "CONFIRM".
Pairing the camera
Some noti cations before adding the device:
1. This device only supports a 2.4 GHz Wi-Fi router, check that you have a
Wi-Fi router and a 2.4 GHz band connection.
2. Follow the instructions and check that the password has been entered
correctly.
3. Only one device at a time can be added to the app's account. If the
device has already been added to another account, it cannot be added
to another account.
Step 1:
Open the BEABA ZEN CONNECT app and select "+" to add a camera.
Step 2:
Follow the different camera pairing steps on the app. Check that the light
indicator is ashing red and that the tone can be heard when scanning
the QR code
Step 3:
If the device is detected by the app, just add it and press nish to see it
appear in the "MY DEVICES" category. Just select the device in question
to see the video appear on your screen.
Note:
If you experience dif culties with pairing, refer to the FAQ available on the
app (My account > Help and comments > Help).
To explore the features of the application in further details you can refer
to the FAQ of the application.
27