Télécharger Imprimer la page

Hill Audio DMP-230 Notice D'utilisation page 22

Publicité

Les langues disponibles

Les langues disponibles

jingles will now be played in a 1-2-3 sequence and then loop, with every jingle being followed by a
number of minutes of background music as determined by the jingle files name (stated in minutes xx in
the jingle files _ww file name section). If less than 3 jingles are stored in the JINGLES folder on the solid
state memory media, the loop is expedited after the last available jingle. If you want to leave scheduled
jingle replay, press the J1 button again for more than 2 seconds.
D.
GENERAL ADVICE
Apart from using good equipment, good sound comes from using it correctly. Level setting mistakes are
one of the common reasons why even good equipment may not perform as desired. For setting levels,
please be reminded that two guidelines need to be followed:
-
Avoid distortion by leaving some headroom. Never overrun any audio-equipment's inputs.
Level meters and displays allow you to make sure that signals do not enter critical levels.
-
Avoid unnecessary amplification by using as little attenuation as possible.
Obviously these two requirements are marking a leveling window that the operator must match to
achieve a good sound with as little distortion and noise as possible.
WARNING
Excessive volume levels on headphones or other sound systems may cause hearing damage. Always
turn the volume control to minimum when you switch the unit on, and avoid prolonged exposure to
sound pressure levels exceeding 90dB.
CONNECTIONS
The DMP230 uses the connection types show below. The pin convention must be followed. Always
make sure to use good connectors and cables to ensure proper operation. Balanced connections are to
be preferred over unbalanced connections where applicable and feasible. Avoid unbalanced
connections exceeding 2m of cable length.
TECHNICAL SPECIFICATIONS
AC IN ....................................................................................... 110-115v / 220-230v ac 50760Hz
Dimensions .............................................................................. 185.0 x 44.0 x 130.0 mm WxHxD
Weight .................................................................................................................................. 0.9kg

Publicité

loading

Produits Connexes pour Hill Audio DMP-230