Publicité
Les langues disponibles
Les langues disponibles
FUNCTIONAL DESCRIPTION
The DMP230 is a media player with built-in FM radio tuner and 3-jingle spot announcer, allowing you to
play MP3 files from a solid-state USB memory (please see specific notes on media compatibility and
media file structure in the "files, folders and data conventions" chapter). Media navigation is facilitated
by file name readout on a clear-text display. As a second source a FM radio tuner with RDS station
readout is built-in. A jingle player / spot announcer allows you to insert jingles or adverts either on the
spot or via pre-programmed schedule. Completed by an IR remote control, the DMP230 represents a
simple yet sophisticated program source for any commercial sound system.
1.
AC inlet. Use the supplied AC cord to connect the unit to AC mains. Make sure voltage and
frequency stated and set on the unit comply with your local AC supply. Note that this unit
does not have an exposed AC mains fuse. Replacement of the internal AC mains fuse
requires you to hand over the unit to qualified service personnel.
2.
AC Voltage Selector Switch. Switches the AC supply voltage between 110/115V and
220/230V AC. See previous chapter for details.
3.
Stereo Main output. This is a balanced stereo XLR output.
4.
Stereo Main output. This is an unbalanced RCA output carrying the same signal as output
(3).
5.
Maximum level setting for Stereo Main output. This control allows you to limit the
maximum level at the outputs (3) /(4) in order to match the connected sound system.
Adjustments shall be made with a small screwdriver. Note that the total angle is 300 degrees;
do not apply excessive force with the screwdriver.
6.
Aerial socket. Plug in the supplied FM antenna here, or connect any suitable antenna cable
of the house installation here (75 Ohms cable).
7.
Power switch. Switches the unit on and off. Make sure you switch the unit off when not in
use.
8.
SD card slot. Insert a FAT32-formatted SD card of max 16GB with a one-level folder
structure for replay of MP3 files here. If a USB memory stick is already inserted into (9), the
SD card will be given priority.
9.
USB memory socket. Insert a FAT32-formatted USB memory stick of max 16GB with a one-
level folder structure for replay of MP3 files here. If a SD card is already inserted into (8), the
SD card will be given priority. Note that this socket does NOT support USB hard drives,
neither for memory size nor for power requirements.
10. Media player display. Show track / folder information, time information, play status, replay
mode settings and play sequence settings. Details are described under items (21...31)
11. Data dial. Depending on the chosen source (FM or Media – via control 18), this control has
different functionality:
In Media Play mode (indicator 28 off). Turn: choose a song / folder, Press: activate the
choice
In FM mode (indicator 28 on): press: choose between frequency scroll or station preset
scroll. Turn: choose frequency or station. The choice is immediately active.
12. Folder level (Store) button. Depending on the chosen source (FM or Media – via control
18) this control has different functionality:
In Media Play mode (indicator 28 off). Press: go to folder level then navigate by data dial (11)
In FM mode (indicator 28 on): allows you to store a new station preset. Choose frequency
scroll mode by pressing (11) if required. Press the Folder level (store) button (12) once to
display the station preset you wish to store the frequency at. Choose the preset by turning
Publicité
