Hill Audio DMP-230 Notice D'utilisation page 18

In Media play mode (indicator 28 off): either the remaining or elapsed time are displayed in a
hh:mm:ss format, depending on the setting made by (16).
In FM mode (indicator 28 on): if the unit works in station scroll mode, the currently chosen
station preset number is displayed. If the unit works in frequency scroll mode, this part of the
display remains unused (blank).
22. Time Mode Display (elapsed): In Media play mode, this part of the display indicated that the
elapsed time of the current track is shown in the time display (21). The setting can be altered
by (16). This part of the display remains unused in FM mode.
23. Time Mode Display (remaining): In Media play mode, this part of the display indicates that
the remaining time of the current track is shown in the time display (21). The setting can be
altered by (16). This part of the display remains unused in FM mode.
24. Numeric data display. This part of the display is not used in this product. This is NOT a
malfunction.
25. 8-digit Clear Text Readout. Depending on the chosen source (FM or Media – via control
18), this part of the display shows different content:
In Media play mode (indicator 28 off): the file name of the currently playing track is shown,
with its first 30 digits scrolling through the display. Letters exceeding 30 digits will be
discarded. Note that it is NOT an ID3 tag readout, but a file name readout, so files must be
named properly to yield a sensible displayed content. The display will show the file name and
alternate with the folder name the current file is located in. Whether at a specific time the file
or the folder name is displayed, is indicated by the respective symbols (26 / 27)
In FM mode (indicator 28 on): the RDS station name (PS section of the RDS signal) is
displayed if the received FM signal contains this information. If no RDS station name is
available, the currently tuned frequency is displayed. Note that the unit only displays the
station name of the RDS signal, no other potentially contained RDS content.
26. Folder Name Display indicator. In Media play mode, this indicator shows that the current
content of the Clear text readout (25) is a folder name. This indicator is not used in FM mode.
27. File Name Display indicator. In Media play mode, this indicator shows the current content
of the Clear text readout (25) is a file name. This indicator is not used in FM mode.
28. Source Mode indicator. Shows whether unit is in Media play mode (indicator off) or FM
mode (indicator on). The mode can be changed via the control (18).
29. Play Sequence indicator. In Media play mode, this indicator shows whether the unit is set to
straight sequential or random play sequence. The setting can be altered by control (14). This
indicator is not used in FM mode
30. Play Mode indicator. Based on the selection made by control (15), this part of the display
shows the letter "SPL", "SLO", "ACO" or "ALO". This indicator is not used in FM mode
31. Transport status indicators. In Media play mode, 3 standard symbols indicate whether the
unit is in PLAY, PAUSE or STOP status. The 1
product, this is NOT a malfunction.
REMOTE CONTROL ELEMENTS
The DMP230 includes an IR (infrared) remote control. For proper operation, a line a sight between the
remote control and the sensor on the DMP230 (17) is required. The IR remote does only control the
basic functions of the DMP230 and as such adds convenience to the operation, but does not replace the
front panel control on the unit itself.
st (outmost left) indicator is not used in this