Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Symptom
Power does not turn
on.
Air does not flow
Air volume is low
The Power indicator
on the control panel
is flashing.
The Odor & Dust
monitor remains
orange.
Verification item
Is the power plug securely
inserted in the power outlet?
Has the filter been taken out
of the plastic bag when it was
installed?
Is the air inlet or outlet dirty?
Is the filter cover completely
closed?
The dust sensor and odor
sensor can sometimes react
to changes in temperature or
humidity, as well as to gases
emitted from sprays.
Insert the power cord securely in the
power cord connecting port of the base
unit and the power outlet.
Take the filter out of the plastic bag and
install it again.
Clean and remove dirt off the air inlet or
outlet on the base unit. If the condition
does not improve even after cleaning
the product, replace the filter with a
new one.
Verify to ensure that the filter has been
installed properly and close the filter
cover completely.
Give it some time and see if the color
of the Odor & Dust monitor changes to
yellow or blue.
20
Solution
EN
Publicité
