CADO LEAF 320i Manuel D'instructions page 200

Initializing Wireless Adaptor
The wireless adaptor built in the base unit can be initialized to the shipping condition when
this product is no longer used or when the product could not be registered properly.
1. Stop operation of the base unit, then press and hold down the Power button
5 seconds. All indicators on the Control Panel turn on.
5
seconds
2. Press the Power button
Panel are turned on. A beep tone is emitted and at the same time all indicators are turned
off and the wireless adaptor is initialized.
The product is automatically deleted from the Product List registered on the application
when the wireless adaptor is initialized. Register the product once again according to the
procedure described in "Register the product with the application" to use the product
again.
EN
again for at least 5 seconds while all indicators on the Control
5
seconds
11
for at least