GUARDO WS-300 Mode D'emploi page 7

E. OUTDOOR TEMPERATURE AND HUMIDITY
The weather station will automatically receive signals from the external sensor after powering
on, showing outdoor temperature and humidity.
F. BAROMETER & WEATHER FORECAST
The weather icon displays - Sunny / Partly Cloudy / Cloudy / Rainy / Snowy - are based on the
hourly calculation of indoor/outdoor temperature & humidity and barometer data. The
weather station uses changing atmospheric pressure to predict weather conditions for the
next 12 hours with 70-75% accuracy.
You can calibrate the barometer:
Turn off the screen by disconnecting the power cord and removing the batteries.
•
Press and hold the【▲/MEM】&【▼/CF】buttons simultaneously, keep them pressed,
•
then plug in the power cord (the day name will change to "CAL" in the display).
The atmospheric pressure digit will flash. Press【▲/MEM】or【▼/CF】to change the
•
value and press【SET】to confirm. The atmospheric pressure digit area will display "God".
• All indicators will display for 1 second and then display normally.
Please note that when you change the atmospheric pressure value, the weather indicator will
also change.
G. ALERT SETTING
In normal time display mode, press and hold the【ALERT】button for 2 seconds to enter
•
the alert setting mode.
• Press the【ALERT】button to turn ON/OFF the temperature alert.
• The setting sequence is: outdoor high temperature value → outdoor low temperature
value → confirm and exit
Press the【▲/MEM】button to increase by 1 step per second; press and hold it for fast
•
increase by 8 steps per second. Press the 【 ▼/CF】 button to decrease by 1 step per second;
press and hold it for fast decrease by 8 steps per second.
• The setting will be automatically confirmed if there is no operation within 20 seconds.
When the alert has been turned ON and the temperature reaches the alert value, the alert
•
icon will flash and you will hear a beep sound.