GUARDO WS-300 Mode D'emploi page 6

will enter into time setting mode and the information to be set will flash. The menu
sequence is: hour → minute → year → DM/MD → month → date → Barometric Pressure
unit  language selection → 12/24h → beep  confirm and exit.
• Press【▲ / MEM】or【▼ / CF】to change the setting item to the desired values.
• Weekday and month can be displayed in 5 languages: German, English, French, Italian,
Spanish.
• The setting will be automatically confirmed if there is no operation within 20 seconds.
• Press the【SET】button to confirm the setting.
Remark: Moon phase indication will change automatically after time/date have been set.
C. ALARM and SNOOZE
• Press the【ALARM】button to display the alarm time.
• Press the【ALARM】button again to turn on/off the alarm.
• Press and hold the【ALARM】button to enter alarm setting mode.
• The information to be set will flash. The setting sequence is: hour  minute  alarm date
(MO-SU or MO-FR)  confirm and exit.
• Press【▲ / MEM】or【▼ / CF】to change the item to the desired values.
• The setting will be automatically confirmed if there is no operation within 20 seconds.
• The alarm sound will last for 2 minutes, and will change as following:
0-10 seconds: 1 beep per second
11-20 seconds: 2 beeps per second
21-30 seconds; 3 beeps per second
> 30 seconds: Keeps beeping
• After 2 minutes, the alarm is cancelled automatically.
• When the alarm sounds, press the 【SNOOZE/LIGHT】 button to activate the Snooze function
for 5 minutes (the snooze icon "ZZ" will appear on the display) or press any other button to
stop the alarm sound. Alarm will be activated again after 24 hours.
• To fully deactivate the alarm, press the【ALARM】button in standard mode.
D. MEMORY
• In normal time display mode, press the【MEM】button to check the indoor and outdoor
temperature and humidity, the record sequence is : Indoor/outdoor maximum
temperature & humidity → Indoor/outdoor minimum temperature & humidity.