Duty Cycle - HomeMatic HM-ES-PMSw1-Pl-DN-R1 Mode D'emploi

2 s lighting up green
Slow orange flashing
Fast red
flashing
Short red, green and
orange flashing
1 x long, 1 x short
red flashing
1 x long, 2 x short
red flashing
8.2

Duty cycle

The duty cycle is a legally regulated limit of the transmission time of de-
vices in the 868 MHz range. The aim of this regulation is to safeguard
the operation of all devices working in the 868 MHz range.
In the 868 MHz frequency range we use, the maximum transmission
time of any device is 1% of an hour (i.e. 36 seconds in an hour). Devices
must cease transmission when they reach the 1% limit until this time
restriction comes to an end. Homematic devices are designed and pro-
duced with 100% conformity to this regulation.
During normal operation, the duty cycle is not usually reached. However,
Error codes and device LED feedback
Teach-in procedure
failed
Stage before reset-
ting to factory set-
tings
The factory settings
of the device will be
restored.
LED test display af-
ter power recovery
Duty cycle
reached
Device defective
Please try again.
Device is waiting for
channel button to be
pressed and held in
order to carry out a re-
set, or for a short but-
ton press to cancel the
process.
/
Wait until device LED
switches off
s. sec. „8.2 Duty cycle"
on page 37
Please contact your
retailer.
37