Beko BUFR2715PSIM Manuel D'utilisation page 18

Troubleshooting
• The freezer door washer may be dirty, worn out, broken or not properly settled.
>>> Clean or replace the washer. Damaged / torn door washer will cause the
product to run for longer periods to preserve the current temperature.
Shaking or noise.
• The ground is not level or firm. >>> If the product is shaking when moved slowly,
adjust the feet to balance the product. Also make sure the ground is sufficiently
firm to bear the product.
• Any items placed on the product may cause noise. >>> Remove any items placed
on the product.
The product is making noise of liquid flowing, spraying etc.
• The product's operating principles involve liquid and gas flows. >>> This is normal
and not a malfunction.
There is sound of wind blowing coming from the product.
• The product uses a fan for the cooling process. This is normal and not a
malfunction.
There is condensation on the product's internal walls.
• Hot or humid weather will increase icing and condensation. This is normal and not
a malfunction.
• The doors were opened frequently or kept open for long periods. >>> Do not
open the doors too frequently; if open, close the door.
• The door may be ajar. >>> Fully close the door.
There is condensation on the product's exterior or between the doors.
• The ambient weather may be humid, this is quite normal in humid weather. >>>
The condensation will dissipate when the humidity is reduced.
The interior smells bad.
• The product is not cleaned regularly. >>> Clean the interior regularly using
sponge, warm water and carbonated water.
• Certain containers and packaging materials may cause odor. >>> Use containers
and packaging materials free of odor.
• The foods were placed in unsealed containers. >>> Keep the foods in sealed
containers. Micro-organisms may spread out of unsealed food items and cause
bad odor. Remove any expired or spoiled foods from the product.
The door is not closing.
• Food packages may be blocking the door. >>> Relocate any items blocking the
doors.
• The product is not standing in full upright position on the ground. >>> Adjust the
stands to balance the product.
• The ground is not level or firm. >>> Make sure the ground is level and sufficiently
firm to bear the product.
18 /20 EN
Freezer / User Manual