English - Wurth Master MH 3-XE Traduction De La Notice Originale

OBJ_BUCH-742-002.book Page 10 Monday, December 14, 2009 11:52 AM
Technical Data
Demolition Hammer
Art. No.
Rated power input
Impact rate min
Impact energy per stroke
Chisel positions
Chiselling capacity in
concrete of medium
hardness kg/h
Tool holder
Lubrication
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given apply for nominal voltages [U] of
230/240 V.
Noise/Vibration Information
Measured sound values determined according to
2000/14/EC.
Typically the A-weighted noise levels of the product
are: Sound pressure level 90 dB(A); sound power
level 101 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Chiselling: Vibration emission value a
2
Uncertainty K=1.5 m/s .
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the
main applications of the tool. However if the tool is
used for different applications, with different acces-
sories or poorly maintained, the vibration emission
may differ. This may significantly increase the expo-
sure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: main-
tain the tool and the accessories, keep the hands
warm, organisation of work patterns.
10–English
We declare under our sole responsibility that the
MH 3-XE
product described under "Technical Data" is in con-
0702 238 X
formity with the following standards or standardiza-
W 650
tion documents: EN 60745 according to the
-1
0–3500
provisions
J 4.3
98/37/EC (until 28 Dec 2009), 2006/42/EC (from
12 29 Dec 2009), 2000/14/EC.
2000/14/EC: Guaranteed sound power level
105 dB(A).
according to Annex VI.
31
SDS-plus
Notified body:
Oil lubrication TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Technical file at:
kg 3.5
Adolf Würth GmbH & Co.KG, PFW,
/II
D-74650 Künzelsau
Künzelsau, 30.07.2009
Adolf Würth GmbH & Co. KG
N. Heckmann
❏ Before any work on the machine itself,
2
=16 m/s ,
h
❏ Operate your machine only with the auxil-
The auxiliary handle 6 can be set to any position for
a secure and low-fatigue working posture.
Turn the bottom part of the auxiliary handle 6 in
counterclockwise direction and swivel the auxiliary
handle 6 to the desired position. Then retighten the
bottom part of the auxiliary handle 6 by turning in
clockwise direction.
Declaration of Conformity
of the directives
Conformity assessment
A. Kräutle
Auxiliary Handle
pull the mains plug.
iary handle 6.
2004/108/EC,
procedure
14.12.09