Kawai F-351 Instructions D'assemblage page 3

3. Mounting the digital piano onto the stand
Carefully lift the digital piano onto the assembled stand.
5. Connecting the pedal cable
5- 1
Pass the pedal cable (extending from the rear of the
pedal board) through the aperture to the front of the
main body, and connect to the PEDAL terminal.
Ensure that the pedal cable plug
is facing the direction shown and
correctly aligned.
5- 2
Pass the cable through the hook provided at the back of
the main unit.
6. Adjusting the adjuster bolt
A pedal support bolt is attached at the base of the pedal
board to aid stability when the pedals are pushed.
Turn the bolt anti-clockwise until it makes contact with
the floor and supports the pedals firmly.
If the pedal support bolt does not make contact with
the floor, the pedal board may become damaged.
4. Attaching the digital piano to the stand
Ensure that all four screws provided with HML-2 are firmly
tightened.
1
Lower
2
Raise
3