Blue Clean AR388 Mode D'emploi page 6

Operating Instructions and Parts List
S
erVicinG of a
i a
nSUlated
• Pressure washer is not meant
to pump hot water. NEVER
connect it to a hot water supply
as it will significantly reduce the
life of the pump.
• NEVER store the pressure
washer outdoors or where it
could freeze. The pump will be
seriously damaged.
• Release trigger when changing
from high to low pressure
modes. Failure to do so could
result in damage.
objects. Bursting hoses may cause
injury. Examine hoses regularly
and replace if damaged. Do not
attempt to mend a damaged hose.
o
PeratinG
Pump
High Pressure Hose
1. Remove shipping cap from back
of pressure washer.
2. Install threaded end of high
pressure hose by pushing into
back of pressure washer then
turn clockwise until tight.
d -
oUble
( )
PPliance cont
Keep hose away
from sharp
i
nStrUctionS
3. Install non-threaded end of
high pressure hose to gun.
4. Press release button on bottom
of gun toward back of the gun,
then insert high pressure hose.
5. Insert lance into the gun by
pushing and turning clockwise
at the same time.
6. Push and turn counterclockwise
to remove.
7. Remove shipping cap from
front of pressure washer.
6
AR388
Pump
Hose
Garden
Hose
Adapter
www.ar-blueclean.com