tomado TDW5501W Mode D'emploi page 38

IS THE DISHWASHER READY FOR USE?
1. The dishwasher is level and fixed properly.
2. The inlet valve is open.
3. The fill hose connections are fully tightened and not leaking.
4. The appliance is plugged in.
5. The drain hose is properly placed.
6. All packing materials and printings should be taken out of the dishwasher.
FAULTCODE
The SNEL30 light flickers fast
The indicator lights SNEL30 and
DELICATE flicker fast
The ECO light flickers fast
The indicator lights BASIC, ECO
and SNEL30 flicker fast
Repairing the machine yourself or having it repaired by a non-professional could cause severe safety risks for the user of
the machine and will affect the warranty.
WHAT TO DO IF...
....the program won't start?
• Check if the plug is connected.
• Check the fuse in the fuse box.
• Make sure the water tap is open.
• Make sure the door of the dishwasher is closed properly.
• Check whether the dishwasher is turned on with the On/off button.
• Check whether the water inlet hose and filters aren't clogged.
...the indicator lights won't go off after the cycle has finished?
• The On/ off button is not released yet.
...detergent residues are left in the detergent reservoir?
• Detergent has been added when the reservoir was damp.
...water is left inside the dishwasher at the end of the cycle?
• The water drain hose is clogged or twisted.
• The filters are clogged.
• The cycle has not finished yet.
...the dishwasher stops during a wash cycle?
• Power failure.
• Water supply failure.
• The program can be paused.
...you hear noise during a wash cycle?
• The dishwasher is not loaded properly.
• One of the spray arms is hitting the dishes.
TROUBLESHOOTING
DESCRIPTION
Inadequate water supply.
The dishwasher is not
reaching the required
temperature.
Overflow.
Failure in the electronics.
EN - 38
CHECK
• Check whether the tap is fully open and there nothing
blocking the water mains.
• Close the tap, remove the input hose and check whether it
is clogged.
• Start the dishwasher again. Contact the customer service
department when the error remains.
• The heating element is not working. Contact the customer
service department when the error remains.
• A part of the dishwasher leaks.
• Close the tap.
• Contact the customer service department.
• Turn the dishwasher off and contact the customer service
department.