Télécharger Imprimer la page

Philips QT4050 Mode D'emploi page 3

Masquer les pouces Voir aussi pour QT4050:

Publicité

Les langues disponibles

Les langues disponibles

recycling. By doing this, you help to preserve
the environment (Fig. 17).
-
The built-in rechargeable battery contains
substances that may pollute the environment.
Always remove the battery before you
discard and hand in the appliance at an official
collection point. Dispose of the battery at an
official collection point for batteries. If you have
trouble removing the battery, you can also take
the appliance to a Philips service centre. The
staff of this centre will remove the battery for
you and will dispose of it in an environmentally
safe way. (Fig. 18)
Removing the rechargeable battery
Do not connect the appliance to the mains again
after you have opened it.
Follow the steps below to remove the
rechargeable battery.
1
Disconnect the appliance from the mains and
let the appliance run until the motor stops.
2
Open the lid of the hair-collection
chamber (Fig. 11).
3
Remove the 4 screws inside the hair chamber
with a screwdriver (Fig. 19).
4
Pull the hair-collection chamber out of the
appliance with some force (Fig. 20).
5
To remove the front panel, wedge a
screwdriver between the front panel and the
inside of the appliance (Fig. 21).
6
Remove the 4 screws on the inside of the
appliance (Fig. 22).
7
Remove the inner panel (Fig. 23).
8
Remove the printed circuit board with the
rechargeable battery connected to it (Fig. 24).
9
Cut the wires between the printed circuit
board and the rechargeable battery.
Guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at www.
philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If
there is no Consumer Care Centre in your country,
go to your local Philips dealer.
3
4222.002.8118.1

Publicité

loading