Charging Up The Battery - MAXXMEE Mini Massage Gun Hot & Cold Pro Mode D'emploi

EN
■
Do not cover the device or
the heating attachment during
charging to prevent overheating.
NOTICE – Risk of Damage to
Material and Property
■
The device or the heating
attachment must be switched
off when they are connected to
or disconnected from the mains
power.
■
Make sure that the connecting
cable is not squashed, bent or
laid over sharp edges and does
not come into contact with hot
surfaces.
■
When the USB mains adapter is
pulled out of the plug socket,
always pull on the USB mains
adapter and never the USB
cable.
■
Do not pull or carry the device
by the USB cable.
■
Use only original accessories
from the manufacturer in order
to guarantee that there is no
interference that may prevent
the device from working and to
avoid possible damage.
■
Protect the device from heat
sources, naked flames, sub-ze-
ro temperatures, persistent
moisture, wet conditions and
impacts.
16
CHARGING UP THE
BATTERY
Please Note!
■
A USB mains adapter corre-
sponding to the technical data
of the device or the heating
attachment is also required
(see rating plate or "Technical
Data"). This is not supplied with
the device.
■
Risk of a short circuit! Do not
stick any conducting objects
(e. g. a screwdriver or similar
implement) into the charging
sockets.
■
Charge the device and the heat-
ing attachment only in closed
rooms.
■
Do not charge the device or the
heating attachment in rooms
with high humidity.
It is essential that you charge up
the battery of the main unit (2) and
the heating attachment (12) fully
before you first use the device in
order to achieve the maximum
charging capacity.
1. Plug the USB-C connector of
the USB cable into the charging
socket (6) on the device or on
the back of the heating attach-
ment and the USB connector
into the socket of a suitable USB
mains adapter.
2. Connect the USB mains adapter
to a plug socket that is easily
accessible. The charge con-
trol lamp (7) on the device or
heating attachment lights up