LC-POWER LC-M32-QHD-165-C Mode D'emploi page 19

2. lock the rear shell four screws out (the screen can not leave the Pauli dragon
foam to prevent broken screen).
3. Take out the wall mount transfer parts from the bubble bag and hang up
with the wall fi�ngs. Take out four M4*16mm screws from the annex bag
and lock the wall a�achment to the back shell with screws.
VESA connector "UP" x1
VESA connector"down" x1
M4*16 Screw Bolts X4
4. Do not directly pinch the screen with your hands during hanging the
product to prevent the screen from breaking.
M4*16 Screw x2
Wall
Wall hanging support
Eng-6
screw x4
M4*16 Screwx2