Stand Installa�On - LC-POWER LC-M32-QHD-165-C Mode D'emploi

5. Stand lnstalla�on
1. Open the package, take out the product with foam s�ll a�ached, and gently
place it on a desktop or table.
2. Take out the base and bracket and lock them with three screws.
screw x3
3. Remove the upper styrofoam (Note: the machine cannot leave the lower
styrofoam) and press the bu�on to take out the rota�ng sha� assembly.
Stand Plate
4. Take out the rota�ng sha� assembly from the whole machine and lock it
with the support base with two countersunk screws.
screw x2
Eng-4