Preparation For Built-In Under-Counter Installations Only - Monogram ZDOD240NSS Instructions D'installation

PREPARATION FOR BUILT-IN UNDER-
COUNTER INSTALLATIONS ONLY
The top canopy may be removed when installing under a
countertop.
• Remove the three screws from the back of the top
canopy (A).
• Using heavy-duty work gloves, lift up on the top canopy
back (B) and slide it forward until it unlatches from the
unit (C).
• Lift the top canopy up and off of the unit.
NOTE: Keep the top canopy and screws for future free-
standing installations.
NOTE: When installing the unit in a free-standing
configuration, the top canopy must be left in place.
• If replacing the top canopy make sure the three latches
in the front slide into the front lip of the canopy before
pushing the canopy to the rear of the unit.
1" = 2.5 cm; 1' = 0.3 m
31-51542-7
Design Guide
CAUTION
canopy top may be sharp. Wear heavy-duty work gloves
when moving the top.
Under side edges of the stainless steel
(B)
(A)
(C)
5