Accessories - Tintometer Lovibond SensoDirect Con110 Mode D'emploi

However, accurate measurements may still be made for several hours after the "Low Bat-
tery" indicator first appears.
2. Remove the protective cover before replacing the battery. To replace the battery, remove
the Battery Compartment Cover (Figure 1, 9) on the rear of the meter.
3. Remove the battery, install a replacement one (006P DC 9V battery (heavy duty type),
MN1604 (PP3) or equivalent) and replace the battery compartment cover.
7.

Accessories

722250 Calibration solution 1413 μS/cm, 500 mL, traceable to N.I.S.T.
724400 Conductivity electrode (K = 1.0), 2-Pol. Graphite
SensoDirect 110
9