Pro-User APB220 Mode D'emploi page 14

• Press when ring tone is heard
Caller ID Display
NOTE: Caller ID Display is a network service, please consult your network provider for
details.
Caller ID can be displayed in 3 ways:
a) By Name & Phone Number
APB220 can display the caller's name when receiving call. To display caller's name, the
name must be stored in the phonebook
b) By Phone Number
Phone number will be displayed if there is no record of that number in the phonebook
c) Withheld Number
When a caller withholds his number, nothing will be displayed
DTMF (Dial Tone Modulation Frequency)
• Press and hold M for 2 seconds during a call
• Select number by +/-
• Press to confirm
Call Waiting
NOTE: Call Waiting is a network service, please consult your network provider for details.
To answer an incoming call during a conversation:
• Press to hold Line 1 & accept the incoming call (Line 2) or
• Press to end Line 1 & accept the incoming call
To switch calls between the two lines:
• Press to switch between lines
Interchanging APB220 and Handset
You may interchange the call between your handset and APB220 while conversation is
ongoing.
To shift from APB220 to handset or vice versa:
• Press and hold for 2 seconds
G. Parking Assistant
To turn the on-screen display guideline ON/OFF:
• Press once
NOTE: Interference may occur if Bluetooth function & Backup Camera function are
activate at the same time.
18
14