Pro-User APB220 Mode D'emploi page 10

OPERATION
There are 6 control buttons available for users to have their controls:
A. Power ON/OFF
• APB220 will automatically turn ON when it is connected to a power source
• Hold to turn APB220 ON/OFF
• When turned ON, APB220 will enter search mode Connecting to look for known
Bluetooth devices
• To search again, press once to activate search mode
• When the vehicle is in reverse gear, APB220 automatically enter back up mode
NOTE: For automatic Bluetooth connection, please make sure Bluetooth mode on your
mobile phone is activated and you must have successfully paired and connected to
APB220 at least once in order to activate this feature.
Make sure the Bluetooth is off before parking for safe operation.
B. Pairing/Linking
Pairing Bluetooth enables devices like mobile phones to work with the APB220 Rearview
Mirror Speakerphone. This step only needs to be performed once.
Before Pairing the APB220 Bluetooth Speakerphone:
• Ensure the Bluetooth on your mobile phone is activated
• Ensure the APB220 Rearview Mirror Speakerphone is plugged into a 12V power source
Follow the steps below to pair your APB220 with your mobile phone:
• Power ON the APB220
• Press and hold M for 2 seconds
• Screen will indicate Pairing Mode
NOTE: APB220 is now in pairing mode
• Activate the Bluetooth settings of your mobile phone
NOTE: The following steps are general procedure; to access Bluetooth Menu for your
mobile phone, please refer to your phone user manual.
• Select SET-UP or CONNECT from your mobile phone menu
10