Hilti DD-HD XC Mode D'emploi page 12

DD-HD XC cross-column adaptor
It is essential that the operating instruc-
tions are read before initial operation.
Always keep these operating instructions
together with the product.
Ensure that the operating instructions are
with the product when it is given to other
persons.
Cross-column adaptor
Ceiling plate
Retaining screws (2)
Adjusting screw
Column
Carriage advance (square socket)
Clamping lever
Rail clamp
Clamping screws (2)
Rail carriage DD-HD30-CA
(not supplied)
Securing screw
Base plate
Retaining screws (2)
Locking screw
Eccentric bolt
Rail
Carriage
Centering point
Lever
Round pin
Rotation device (accessory)
Contents
1. General information
2. Description
3. Parts list
4. Technical data
5. Safety rules
6. Before use
7. Care and maintenance
8. Warranty
Printed: 07.07.2013 | Doc-Nr: PUB / 5069651 / 000 / 00
1. General information
1.1 Safety notices and their meaning
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
NOTE
Draws attention to instructions and other useful infor-
mation.
1.2 Pictograms
Warning signs
General
warning
Obligation signs
Wear eye Wear a
protection hard hat
Symbols
Read the
operating
instructions
before use.
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
Page
the operating instructions.
7
8
Location of identification data on the machine
8
The type designation can be found on the type plate on
8
the cross-column adaptor. Make a note of this data in
your operating instructions and always refer to it when
9
making an enquiry to your Hilti representative or ser-
10
vice department.
11
11
Type:
Wear Wear safety
protective shoes
gloves
en
7