Cleaning And Maintenance; Cleaning The Soleplate; Cleaning The Iron; Emptying And Cleaning The Boiler - Rotex U981EU4 Mode D'emploi

• CLEANING AND MAINTENANCE

Caution! Before you clean your iron, pull the power plug out of the socket and let the
o
iron cool down.
o Never immerse the appliance in water or other liquids. Regularly check the power
cord for damage before using your iron. Should you detect any damage, take it to
your nearest customer service and have it replaced by a qualified specialist.

• CLEANING THE SOLEPLATE

o Deposits and other fabric residues can be removed from the soleplate using a cloth
moistened in a water and vinegar solution. Use a dry cloth to wipe the soleplate dry.
o Do not use a scouring agent to clean the soleplate. Ensure that the soleplate remains
smooth: avoid contact with metal objects.

• CLEANING THE IRON

o Clean the plastic parts with a damp, non-abrasive cloth, and dry it using a dry cloth.

• EMPTYING AND CLEANING THE BOILER

o Caution! Turn the appliance off after ironing and pull the power plug out of the
socket. Before you unscrew the safety cap (1), completely discharge the steam (press
the steam button all the way down) and wait until the appliance has cooled down
sufficiently (approx. 2 hours) and the internal pressure has been released.
The following maintenance work must be carried out when water drips out of the
o
steam holes, or at least around every 3 months.
Before you clean your iron, pull the plug out of the socket and make sure the iron

has completely cooled down.
Completely empty the boiler over a sink.

Fill the boiler with tap water. Close the safety cap and shake the appliance.

Once again, empty all the water in the boiler.

Repeat this process until the water running out is clear and clean.

Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
73