Troubleshooting - MC Crypt DJ-80 Notice D'emploi

Troubleshooting

In purchasing the Mc Crypt DJ Mixer, you have acquired a reliable product which has been designed using state-of-
the-art technology.
Nevertheless, problems or faults may occur.
Therefore, we would like to describe here how to eliminate possible faults:
Please observe the safety instructions!
Device does not work after the mains switch POWER has been switched on:
• The mains plug has not been plugged into the socket correctly
• The mains socket is not supplied with current
• Fuse defective
The mixing desk is turned on but no sound can be heard:
• No input signal;check signal source
• Wrong input selected; select proper input
• Input level wrongly set; adjust level as described at „Setting the volume"
No signal can be heard although the level display indicates a signal:
• Downstream device (amplifier) not switched on or incorrectly set
• The output is not or wrongly connected
There is a humming sound:
• The record player ground cables are not connected to the ground screw GND (25)
• A buzz loop arises between the connected devices Connect the signal mass with special ground-insulated cables
A channel does not work:
• A connection cable has come off
• The balance control on the amplifier is out of adjustment
Tone is distorted:
• The level on the mixing desk is incorrectly set or the connected amplifier is overmodulated
• The connected device does not adhere to the required specifications for a cinch connection or does not have the
appropriate connections
• The volume on the connected amplifier is too high
Repairs other than those described above should only be performed by an authorised
specialist.
40
All manuals and user guides at all-guides.com