Commissioning; Switching The Mixing Desk On/Off; Selecting The Input - MC Crypt DJ-80 Notice D'emploi

Commissioning

Do not turn the device on before you have read and understood these operating instructions.
Check again that all connections are correct.
a) Switching the mixing desk on/off
Not observing the the following sequence when switching the mixing desk on and off could
damage the loudspeakers or the amplifier.
Switching on
• Make sure that the faders CH1/CH2 (10) are set to minimum volume (channel fader pulled right back to the lowest
point).
• Switch on the output devices that are connected to the mixing desk first.
• Switch on the mixing desk with the POWER switch (1) (set switch to ON position).
• Switch on the connected amplifier and the recording device (connected to the REC socket (28)). The mixing desk
is now ready for operation.
To switch off
• To switch off the mixing desk, first turn the volume on the mixing desk and then that of the amplifier to minimum.
• Switch off the amplifier.
• Next, switch off the mixing desk using the POWER switch (1) and then the playback devices (record player, CD
player, etc.).
• If you do not require the mixing desk for a longer period, unplug the mains plug from the socket.
b) Selecting the input
Reduce the volume to minimum setting using the relevant fader CH1/CH2 (10) before actuating
an input selection switch PHONO/CD/LINE (2). Due to the different levels of the respective
playback sources, sudden excessive volume could occur when switching between the inputs.
• Use the input selection switches PHONO/CD/LINE (2) to select the desired inputs.
All manuals and user guides at all-guides.com
35