MC Crypt DJ-80 Notice D'emploi page 30

Connection and control elements
(25) Screw terminals GND
To prevent buzzing, a ground connection can be established with these screw terminals between the mixing
desk and the ground cables of the record players (mostly black cable with clamp-type socket).
(26) PHONO connections
Connect your record players to these inputs. The input PHONO1 is intended for CH1, the input PHONO2 for
CH2.
These inputs are only suited for record players with magnetic pick-up system. Never connect
devices with line outputs, e.g. CD players to these inputs!
(27) Connections LINE and CD
Connect your LINE devices to these inputs. The input LINE1 or CD1 is intended for CH1, the input LINE2 or
CD2 for CH2.
These inputs are only suited for LINE devices, e.g. CD players. Never connect record players
here!
(28) REC connection
This output is intended for connecting a recording device, e.g. cassette recorder, tape recorder or CD
recorder to record the mixing desk signal.
This output is not influenced by the control MASTER (4).
(29) MASTER connection
This output is intended for connection of the amplifier.
The signal volume is affected by the GAIN controls (17), the faders (10) and the MASTER control (4).
(30) FUSE holder
The mains fuse is situated here. The „Maintenance" section in this manual includes instructions on how to
change the fuse.
(31) Mains connection AC INPUT
This cable serves to supply the mixing desk with power.
30
All manuals and user guides at all-guides.com