Publicité
Les langues disponibles
Les langues disponibles
SPECIFICATIONS
Your new SPT160V comprises:
1 Variable Speed Reciprocating Saw
1 Metal Cutting Blade
1 Wood Cutting Blade
1 Blade clamp hex key, 4 mm
1 Set of spare carbon brushes
TECHNIICAL SPECIFICATIONS
Voltage: 120V AC, 60Hz
Current Rating: 5.5 amps
No load speed: 500-3000 SPM
Stroke length: 20 mm (0.8")
Cord Length: 2 m (6.5')
Tool Weight: 3.3 kg (7.3 lb. )
Cutting Capacity: Wood - 115 mm (4.3")
Steel Tube, Plastic, Aluminum Alloy - 10 mm (0.39")
FUNCTIONAL DESCRIPTION
Figure 1 names the major components of the SPT160V
A. Saw Blade
B. Pivoting, Adjustable Shoe
C. Quick Change Blade Clamp Screw
D. Variable Speed Dial
E. ON - OFF Trigger Switch
F. Trigger Interlock Button
G. Shoe Adjustment Lever
OPERATING PROCEDURES
BLADES
Your SPT160V reciprocating saw is designed to accept standard reciprocating
saw blades. Note the the shape of the ends of the blades supplied with your tool.
Check to ensure that any blades you use on this saw are designed for the task.
WARNING: Before installing or removing saw blade, turn off the power switch
and disconnect the plug from the power source.
INSTALLING A SAW BLADE
1. Loosen the Quick Change Blade Clamp Screw.
2. Insert the blade into the blade clamp. Make sure that saw teeth are ALWAYS
facing down.
3. Tighten the Quick Change Blade Clamp Screw to secure the blade.
WARNING: Before you plug in the power cord, always pull on the blade sharply
to ensure it is firmly held in the blade clamp. Failure to do so may result in
serious injury.
RUNNING THE SPT160V
1. Plug in the tool.
2. Hold the tool firmly. Check to make sure that saw blade travel is not obstructed.
3. Engage the interlock button with your thumb.
4. While holding in the interlock button, squeeze the trigger switch. Squeezing
the trigger more will increase the speed. The maximum speed is adjustable
by rotating the speed adjustment thumb wheel.
5. To stop the saw, release the trigger.
4
!
!
Publicité
