Wolf ICBVW45B Guide D'installation page 2

COOKTOP VENTILATION HOOD
Contents
Cooktop Ventilation Hood
2
Specifications
2
Installation
3
Troubleshooting
5
Features and specifications are subject to change at any
time without notice.
|
2 English
Important Note
To ensure this product is installed and operated as safely
and efficiently as possible, take note of the following types
of highlighted information throughout this guide:
highlights information that is especially
IMPORTANT NOTE
important.
CAUTION indicates a situation where minor injury or product
damage may occur if instructions are not followed.
WARNING states a hazard that may cause serious injury or
death if precautions are not followed.
Save these instructions for the local
IMPORTANT NOTE:
electrical inspector.
Product Information
Important product information including the model and
serial number are listed on the product rating plate. The
rating plate is located under the left side of the hood, above
the filters (filters must be removed). Refer to the illustration
below.
If service is necessary, contact Wolf factory certified
service with the model and serial number.
RATING PLATE
Rating plate location.
SPECIFICATIONS
Installation Requirements
Wolf cooktop ventilation hoods are recommended for
use with Wolf induction, electric and gas cooktops and
integrated modules. For ranges and rangetops, a Wolf pro
ventilation hood is recommended.
These hoods have a telescopic chimney flue. A flue exten-
sion is available through an authorized Wolf dealer.
Installation of the cooktop hood should be 762 mm to
914 mm from the bottom of the hood to the countertop.
Wall and island hoods require an internal or remote blower
assembly, avail able through an authorized Wolf dealer.
Consult a qualified HVAC professional for specific installa-
tion and ducting applications.
RATING PLATE
Rating plate location.